Two of our most popular sewage treatment plants brands are Clearwater & Matrix
The Clearwater Sewage Treatment Plant
The Clearwater uses an aeration chamber rather than a rotating disc as in the BioDisc system, so no moving internal parts.
Benefits:
- High performance rating.
- Can be discharged directly to a watercourse.
- Free from mechanical or electrical components within the unit - very low maintenance and running costs.
- Minimal visual impact on surroundings - low level cover with child safe locks.
- Controlled ventilation.
- Annual emptying.
Process:
Three distinct process stages take place within the single tank:
- First, coarse solids are filtered and retained for gradual breakdown.
- Then the resulting liquid is continuously distributed over a plastic suspended filter by an integral lift, powered by a remotely sited blower.
- Finally, the solids are allowed to settle and, under normal domestic conditions, treated water of 20mg/l BOD, 30mg/l S.S., 20mg/l Ammonia can be achieved.
The Matrix Sewage Treatment Plant
he MATRIX sewage treatment system is designed to achieve the minimum required effluent quality standard of 20mg/litre (BOD) : 30mg/litre (SS) : 20mg/litre Ammoniacal
The certified performance of the MATRIX system is that it produces an average final effluent quality of 11mg/litre (BOD) : 16mg/litre (SS) and 7mg/litre Ammoniacal.
This relates to an average efficiency ratio of 96.2%, better than most other manufacturers. As part of the test procedure the MATRIX system was proven to have one of the lowest operating costs.
All Matrix sewage treatment plants have a standard inlet invert depth, but in keeping with our commitment to customer satisfaction and to keep installation simple, we can manufacture matrix units to specifically meet site requirements. Integral pumped discharges can also be provided with all units, eliminating the need for additional tankage and installation costs.
All Matrix systems are complete with failure alarms as standard (as required by BSEN12566-3) and are not, as with some other companies in this industry which will usually set you back on average over £100.
The MATRIX treatment system is a three stage biological process contained within a single tank structure, based on the principles of a submerged bed reactor and designed in accordance with the requirements of BS6297. Careful configuration of the internal flowpath and the inclusion of non-mechanical recirculation systems ensures optimal process performance as demonstrated by the exceptional results obtained from the independent testing, providing complete peace of mind. There are NO electrical or mechanical components within the Matrix treatment plant thereby eliminating the need for any specialist servicing arrangements ensuring that any maintenance requirements on the MATRIX system are kept to an absolute minimum.
Benfits Of The Matrix Sewage Treatment Plant
- Free nationwide site surveys and technical proposal with no obligation.
- Full technical back up and customer service support.
- Nationwide network of service engineers.
- Supply only or full supply and installation through certified installers.
- Single tank installation to minimize costs.
- Failure alarm systems as standard, not at additional cost.
- GSM telemetry dial out alarm units available at small additional cost.
- No mechanical or electrical parts within the unit.
- Robust Polypropylene construction for easy and cost effective installation.
- No visual intrusion. Flat, flush ground level covers suitable for 1 tonne load.
- Simple installation in vehicular areas, up to D400 loading.
- Low running and maintenance costs.
- Integral discharge pumps where required (all models) no additional tank.
- Deep inlet inverts available to avoid pumping crude sewage to plant.
No comments:
Post a Comment