Authorised Online Distributor For C&L Fabrications (Matrix)

Septic Tanks Supplies have been selected to be an Authorised Online Distributor for all C&L Fabrication products including the Matrix sewage treatment plant

C&L Fabrication is an 'owner driven' independent company specialising in the design and manufacture of sewage treatment systems, pumping stations and ancillary products related to the wastewater treatment industry, together with the ability to provide customers with bespoke fabrications, regardless of their use.

We are dedicated to providing a level of personal service and on-going customer back-up, sadly lacking by many of the larger corporate organisations in our industry. We have a significant depth of knowledge and a commitment to providing only correct, practical, advice and guidance, thereby allowing our customers to make informed decisions. We will never compromise just to 'make a sale' as we firmly believe that environmental issues and long term customer satisfaction are of prime importance.

All of our products are manufactured from elite grade polypropylene utilising the latest in plastics technologies, backed by full process and structural certification to current industry standards and European legislation requirements.

Matrix Sewage Treatment System

For any application, be it domestic, residential, commercial or industrial, where there is no access to a mains sewer by gravity or by pumping, the MATRIX sewage treatment plant provides an extremely safe, efficient, reliable and cost effective solution to sewage disposal.

The design of the MATRIX system takes into account all those aspects which we have found to be important to domestic and commercial customers alike and is fully tested and CE certified to BSEN12566-3, which is now a mandatory requirement, achieving industry leading test results in both process and structural efficiency. (see Standards and Certification.)

There are no mechanical components within the treatment plant itself thereby ensuring that maintenance is minimal, simple and safe.

Installation is quick, simple and cost effective.

Once installed there is little visual impact as the flat cover finishes flush with ground level and is rated for safe pedestrian and light machinery load and there is no loss of area use, unlike treatment plants which have semi domed fibreglass covers.

MATRIX treatment plants can be installed in trafficked areas with little additional cost. (C&L Fabrication must be consulted in every instance).

 Due to the flexibility of our manufacturing process, the MATRIX treatment plant can built to accommodate any site installation restrictions there may be, as long as we can maintain the process requirements.

Vortex 4

The acclaimed VORTEX™ sewage treatment plant is the most advanced sewage treatment system in the UK to date.

Benefits of the VORTEX system:

• Low cost high performance - up to 98.9% pollution reduction
• 10 Year tank warranty
• Small footprint and easy to install – no concreting required*
• High performance, better quality components used
• NITTO linear piston compressors mean almost silent operation and minimal electricity usage
• Built in sampling chamber saving you £300
• Odourless – complete aerobic digestion means no smelly settlement chamber
• Unique debris screening action – wipes, sanitary towels etc prevented from causing serious problems
• EN12566-3 & A1 2009 Certification (satisfies more stringent French requirements)
• Environment Agency approved to discharge to a ditch or watercourse (subject to permit)
• Treatment process can be increased or decreased depending on the population
• Versatile inlet depths - Supplied with standard 150mm up to 900mm inlet invert

The Vortex sewage treatment plant can achieve one of the highest treated quality of effluent on the market to date;

BOD -9
Suspended Solids – 16
Ammonia – 0.4

Here’s how it works:

The ONLY electrical element is a small high quality NITTO motor compressor which uses very little electricity.

There are no pumps, motors or any moving parts within the unit.

Incoming sewage is filtered to avoid mixing non soluble waste such as sanitary towels, wipes etc. Filtered sewage is then aerated and a microbial 'soup' builds up that digests the pollutants and organic particles in the sewage.

These good microbes are continually topped up with the microbes that sink to the bottom of the final settlement tank, guaranteeing an invariant 'friendly bacteria' provision for the digestion procedure.

There is no need to add extra bacteria, as is often required with other types of sewage treatment plant.
Processed sewage then enters the final  settlement chamber where activated sludge bacteria settle down at the bottom. These good microbes are always returned to the digestion chamber to enhance the performance of the treatment system.

The bacterial incrustation that forms on the top of the effluent in the clarification chamber is also constantly sent back through a pipe to the digestion chamber – this is an innovation unique to the Vortex, since other activated sludge plants require the removal of this crust, by hand, at regular intervals.

Sludge Return (FSR KIT)

In all ASP sewage treatment plants, floating sludge accumulates at the top of the clarification chamber. This sludge must be periodically returned to the aeration chamber. If you dont want to manually open this valve on a monthly basis, then fit the Automatic FSR Kit as this makes the process automatic.

No other ASP sewage treatment plant has the ability to manage its own sludge

Price Match Guarantee

At Septic Tank Supplies we are committed to offering the cheapest prices for your off mains drainage product, be it a sewage pump station, septic tank or sewage treatment plant we are determined to make sure you are getting the best deal there is.

We strive to make sure our prices are the most competitive but if one slips the net and you find a cheaper price elsewhere we guarantee to match it* or even beat it where possible!

All we need from you is a link to the product you have seen cheaper and a contact number or email for yourself.

Email us on sales@septictank-supplies.co.uk

Klargester Spare Parts

We specialise in sewage treatment plants, package pump systems, oil separators, grease traps and rainwater harvesting systems.

Whether you have a septic tank, sewage treatment plant, rainwater harvesting system or pump station, we offer various service plans to provide you with peace of mind that the system will operate and function with the minimum amount of hassle.

We recommend that no matter which brand or model of septic tank or sewage treatment system you have, it is checked and maintained regularly. Preventative maintenance is protecting your investment and your environment to avoid costly septic tank repair bills or even damage to the groundwater or environment. If a tank leaks or is damaged it can cause serious problems with the drainage field not to mention big inconveniences such as not being unable to flush toilets.

Extended Warranty Bond Plan

If you have bought a Klargester or Envirocare sewage treatment plant within the last 12 months or thinking of purchasing one, you can enjoy *EXTENDED WARRANTY with our Bond Plan. This plan goes one step further offering you complete re-assurance and convenience in one simple plan. This can be purchased with your product or within 12 months of installation and is subject to completion of a FREE post installation inspection (terms apply).

*Klargester models BA-BB Biodisc 10 year warranty
Klargester models 1 & 2 Biotec 5 year warranty
Envirocare models P6 & P12 5 year warrant

Oil Storage Regulations

Oil Storage Regulations The Oil Storage Regulations apply to all new installations in the UK (both domestic and commercial). Oil is the commonest pollutant in the UK, accounting for one quarter of all incidents. These guidelines are intended to help reduce pollution caused by inadequate storage of oil in above ground oil storage tank installations. Dependent upon your location, you will most likely be covered by either the Control of Pollution (Oil Storage)(England) Regulations 2001 or the Water Environment (Oil Storage)(Scotland) Regulations 2006. Wales and Northern Ireland are exempt but other legislation may apply (additional information below). Your environmental regulator can serve on you an 'anti pollution works notice' if your site gives rise to, or is at risk of giving rise to, pollution of surface waters or groundwater. This notice will require you to undertake remedial action. Many drains lead directly to rivers, streams or lakes. If you allow oil to enter these drains, it has the same effect as pouring it directly into the watercourse. Oil is poisonous to fish and other wildlife and it smothers plants. Just two litres of oil could seriously pollute the volume of fresh water needed to fill an Olympic-size swimming pool and make it undrinkable. You may be prosecuted and fined if oil from your site enters the ground or watercourses. And you may have to pay substantial clean-up costs. The Oil Storage Regulations are designed to prevent oil spills. Does your installation require bunding? Is Secondary Containment of Oil a Legal Requirement? Oil storage Regulations Definition: Secondary Containment, also often refered to as a bunded fuel storage tank, under the Oil Storage Regulations, an oil storage tank which qualifies should be contained within a secondary containment system totalling no less than 110% of the storage tanks full capacity, a bunded oil tank. There is a lot of uncertainty as to whether you should ‘bund’ a storage tank or not, the new oil storage regulationsstipulate that if you are either an institute (school) a commercial or an industrial site you should bund almost any oil or fuel storage tank exceeding 200 litres capacity. You should always seek additional guidance from the environment agency if you propose to install bunded tanks in any location which is within 10 metres of inland coastal waters or 50m of a well or borehole. Various installations (including domestic oil tanks) require other circumstances to be considered, the chart below considers all eventualities and provides links to relevant web pages where more detailed information can be found.

Is it any kind of oil, petrol, diesel, kerosene?		No requirement
Is it waste mineral oil?		Waste Management Licensing Regulations Apply (As of April 6 2008, the Waste Management Licensing Regulations 1994 (as amended) are being replaced by the Environmental Permitting Regulations 2007) in this instance tanks should always be bunded, installations up to 3000L can apply for a simple exemption form (WMX00) otherwise a permit must be obtained for the storage.
Is the oil being stored for onward ditribution?		Refer to the Institute of Petroleum - Environmental Guidelines for Petroleum Distribution Installations. ISBN 085 293 41662
Is the oil stored inside a building?		No requirement under Oil Storage Regulations. Check fire safety section of Building Regulations Additional guidance in Pollution Prevention Guidelinance Note PPG2 and PPG26
Is the oil stored entirely underground?		Refer to Groundwater Protection Code for Underground Fuel Storage
Are you storing less than 200 litres of oil?		No requirement under Oil Storage Regulations. Additional guidance in Pollution Prevention Guidelinance Note PPG2 and PPG26
Are you storing less than 3500L used entirely to heat a farmhouse or other residential property?		is it a new or replacement installation?		Building regulations require the tank to be bunded if the new/replacement storage exceeds 2500 litres. Other factors may still require you to bund the oil store, refer to section J of the building regulations and OFTEC'sDomestic Oil Storage Leaflet (also see footnote below).
Is the oil stored at a refinery?		Environmental PermittingRegulations 2007applies
Is the installation for agricultural use?		Is it greater than 1500 litres capacity?		Silage, Slurry and Agricultural Fuel Oil Regulations require secondary containment
Is the oil stored at a facility in England?		No requirement under Oil Storage Regulations In England. Scotland is covered by the Water Environment (Oil Storage) Regulations 2006 (Similar regulations are due to be introduced in Northern Ireland and Wales please check with your local Environment Officer. Additional guidance in Pollution Prevention Guidelinance Note PPG2 and PPG26
The Control of Pollution (Oil Storage) Regulations 2001apply

Other factors which require a Bunded Tank Can you see the storage tank vent? If not you are required to bund the tank. An Overfill Prevention Valve will also need to be fitted in this instance. You should also provide secondary containment (Bunded Tank) if the oil storage tank falls within a 10m of a water course (stream etc). Also use secondar containment if within 50m of a potable water supply or where spillages could run into drains or reach controlled waters.

Section J of the Building Regs It is unlikely that a fire could be started by a fuel storage tank and it’s contents, However it does need to be protected from a fire that may originate nearby. For example, tanks should be sited: On a solid base, level and at least 42mm thick, that extends a mimimum of 300mm around the footprint of the tank 1800mm away from non-fire rated eves of a building 1800mm away from openings (such as doors or windows) 1800mm away from any appliance flue terminals 1800mm away from a non-fire rated building or structure (ie: garden shed) 760mm away from non fire rated boundaries (ie: wooden fence) If it is not possible to meet these requirements, a fire rated barrier with at least 30 minutes protection should be provided, extending 300mm higher and wider than each applicable face of the tank. Download a copy of Section J of the building regulations. OFTEC recommend that non domestic tanks equal to or below 3500L capacity should be located a minimum of 2m away from any buildings or boundaries. (6m for tanks above 3500L capacity). If this is not possible, walls or barriers of at least 60 minutes resistance which extend 900mm beyond each applicable face of the tank should be used. (120 minutes rating for tanks above 3500L capacity). Planning Permission Domestic users will need to apply for planning permission to install a heating oil tank when: Greater than 3500L capacity Higher than 3m above ground level Nearer to the public highway than the closest applicable corner of the property* Planning permission is also required for any domestic storage tank for fuels other than for oil fired heating applications (ie: LPG). * does not apply if proposed site is greater than 20m from the nearest public highway If you are installing an oil tank and/or connecting pipe work and you employ an installer registered with one of the related competent person schemes, you will not need to involve a Building Control Service

Commercial Applications The Environment Agency are able to impose uncapped fines on anyone who causes any spill, it is not necessarily the responsibility of the site owner as it is the polluter who pays. Please note, this information is provided as a guideline basis only, if in any doubt you should always consult you local authority

Other Requirements It is important that the oil or fuel storage tank is inspected annually. Section 5.1 (b) iii of the above regulations also states that all oil tanks should be labelled with information on how to respond to a leak. Section 7 of the PPG26 pollution prevention guidelines states: “Spill kits containing materials such as oil or chemical absorbents and personal protective clothing should be on site”.

Remember The Environment Agency are able to impose uncapped fines on anyone who causes any spill, it is not necessarily the responsibility of the site owner as it is the polluter who pays. Please note, this information is provided as a guideline basis only, if in any doubt you should always consult you local authority

Bunded Oil Tanks

Bunded oil tanks ideal for intermediate fuel oil storage, this range of products are built to address the growing demand for economical oil storage solutions.

Produced from UV stabilised MDPE, the HQI range of tanks are designed to offer oil storage at a reduced cost without compromising on quality.

By allowing the customer to select which options are (or are not) required to suit their specific application, substantial savings are available.

All HQI storage tanks are supplied with a 10 year warranty included in the price and are designed for both domestic and commercial heating applications.

If you are uncertain if you require a Bunded Oil Tank, please call us on 01923 261660 or check out our website www.septictank-supplies.co.uk

Klargester Approved Re-Seller

Septic Tank Supplies are proud to announce we are a preferred and approved reseller/stockist of all Klargester products.

There are more and more companies now advertising on the internet offering Klargester products but in fact have no buying terms with Klargester. This will lead them to offering you other manufacturers products and the company blaming high lead times and prices on Klargester, which in fact is false.

If you require a Klargester product make sure they are a Klargester approved Stockist or reseller before contacting the company concerned.

Only companies approved by Klargester will have the new Klargester approved banner on their websites.

Tricel UK 6

The Tricel UK 6 is suitable up to 6 people

The Tricel sewage treatment plant system was adopted to fulfill a need to provide exceptional wastewater treatment on sites that are unsuitable for a standard septic tank. When BS Standards EN12566-3, was introduced only treatment systems that have received European Certification can be installed.

The waste is treated through a mechanical aeration process. The level of treatment achieved enables the effluent to be discharged into a watercourse subject to receiving the relevant consent to discharge from the local regulatory bodies such as the Environment Agency for England and Wales, Scottish Environment Agency for Scotland and the Northern Ireland Environment Agency for Northern Ireland.

Tricel was awarded the CE mark after successfully completing 9 months of rigorous testing by the certified laboratory PIA Gmbh Testing Institute for Wastewater Technology in Aachen, Germany.

The Tricel system only requires a granular bacfill with its standard invert and as long as site conditions alow.

Benefits;

• No internal moving parts
• Life time guarantee on the internal cleaning process
• Very low electrical consumption -  est £56 a year
• EN12566-1 European Certified
• Designed in accordance with BS6297:1983
• Low Profile, requiring a smaller excavation (50% less excavation)

Average running cost only £5 Per Month

If you have any questions or require further advice on the Tricel treatment plant please call us on 01923 261660

Delivery maybe more for certain parts of Scotland & Southern England, please call us

Conder New Shallow Range Of Septic Tanks - Millennium

Conder has this month announced the launch of its new range of septic tanks, the Millennium Low Profile Series.

Uniquely designed for a shallow dig, the new Millennium range offers a durable polyethylene structure and automatic outlet cut-off for filter cleaning.  The new Millennium range also offers the benefit of a pre-filter which prolongs the lifespan of the drainage field and increases TSS retention.

Speaking about the new product launch, John Carter, National Sales Manager at Conder Environment Solutions, said: "Conder's commitment to continually improve our products is demonstrated in the launch of the new Millennium range.  With this product we have very much listened to the industry and to the requirements of installers and engineers out in the field and as such have developed this product, which offers some of the most advanced technical qualities in the industry.  This is particularly the case with the built-in impingement pre-filters which are placed at the outlet point of the unit and prevents suspended solids from entering the external pipework and drainage field (soakaway), thus increasing the lifespan of the system.

"We're delighted with the industry's response to the product at such an early stage.  Already, we're receiving really positive feedback on how this product will reduce installation and maintenance costs and increase performance durability."

As well as offering low profile design, pre-filter impingement and automatic outlet cut-off, the new range of Millennium septic tanks also provides a range of enhanced features including lockable pedestrian access cover, a variable invert level and has been approved to CE and EN 12566-1 industry standards.

Already, Conder is seeing orders being placed for the product and is estimating a lift in sales of 50% on last year.

Conder prides itself on running the largest automated GRP tank manufacturing plant out of its north east base in Peterlee, County Durham.

Conder has been in the water and waste water treatment industry for over 40 years and as such chose to design and manufacture the new range on its own site.

At septic Tank Supplies we offer the full range of shallow Conder Tanks

Super Tricel Sewage Treatment Plant Sale

The Tricel sewage treatment plant system was adopted to fulfill a need to provide exceptional wastewater treatment on sites that are unsuitable for a standard septic tank. When BS Standards EN12566-3, was introduced only treatment systems that have received European Certification can be installed.

The waste is treated through a mechanical aeration process. The level of treatment achieved enables the effluent to be discharged into a watercourse subject to receiving the relevant consent to discharge from the local regulatory bodies such as the Environment Agency for England and Wales, Scottish Environment Agency for Scotland and the Northern Ireland Environment Agency for Northern Ireland.

Tricel was awarded the CE mark after successfully completing 9 months of rigorous testing by the certified laboratory PIA Gmbh Testing Institute for Wastewater Technology in Aachen, Germany.

The Tricel system only requires a granular backfill with its standard invert and as long as site conditions alow.

Benefits;

• No internal moving parts
• Life time guarantee on the internal cleaning process
• Very low electrical consumption -  est £56 a year
• EN12566-1 European Certified
• Designed in accordance with BS6297:1983
• Low Profile, requiring a smaller excavation (50% less excavation)

 Average running cost only £5 Per Month

If you have any questions or require further advice on the Tricel treatment plant please call us on 01923 261660 or check out our website - www.septictank-supplies.co.uk

Klargester Washdown Silt Separator

The Environment Agency's PPG3 requires that discharge from pressure washers must discharge to a foul drainage systems. Where there is no foul drainage available, the effluent must be contained within a sealed drainage system or catch pit for disposal by a licensed waste contractor.

Silt build-up is the main problem with washdown facilities. The Conder CWS range of washdown and silt separators is used to remove the silt and will allow some separation of hydrocarbons.

Detergents that are used in wash down areas will break down and disperse the hydrocarbons, hindering the separation process. Therefore, it is important to remember that the main function of wash down separators is to remove silt.

Although it is recognised that single stage separators provide the most efficient separation, 2 and 3 chamber CWS silt separators are available on request.

Application areas:

• Car wash facilities
• Tool hire depots
• Pressure washer facilities

Forecourt Separators

Forecourt separators are full retention separators specified to retain on site the maximum spillage likely to occur on a petrol filling station. They are required for both safety and environmental reasons and will treat spillages occurring during vehicle refueling and road tanker delivery. The size of the separator is increased in order to retain the possible loss of the contents of one compartment of a road tanker, which may be up to 7,600 litres.

Separator Standards and Types

A British (and European) standard (BS EN 858-1 and 858-2) for the design and use of prefabricated oil separators has been adopted. New prefabricated separators should comply with the standard.

Separator Classes

The standard refers to two ‘classes’ of separator, based on performance under standard test conditions.

Class I

Designed to achieve a concentration of less than 5mg/l of oil under standard test conditions, should be used when the separator is required to remove very small oil droplets.

Class II

Designed to achieve a concentration of less than 100mg/l oil under standard test conditions and are suitable for dealing with discharges where a lower quality requirement applies (for example where the effluent passes to foul sewer).

Both classes can be produced as full retention or bypass separators. The oil concentration limits of 5 mg/l and 100 mg/l are only applicable under standard test conditions. It should not be expected that separators will comply with these limits when operating under field conditions.

Septic Tank Supplies Summer Sale

Septic Tank Supplies Summer

At Septic Tank Supplies our Summer Sale is off and running and 100's of customers are taking full advantage of our discounted rates.

Our sale includes some of the country's most sought after off mains drainage products from leading brands such as; Klargester, Kingspan, Conder, WPL & F-Line Rainwater Harvesting.

We are discounting some items buy over £300!! check out what bargains you could be missing out on, on our Summer sale page - Link

Also did you know we wont be beaten on price and will price match any online supplier? 

So if you want affordable and top brand online products check us out.

Klargester Spare Parts

Klargester Spare Parts

We specialise in sewage treatment plants, package pump systems, oil separators, grease traps and rainwater harvesting systems.

Whether you have a septic tank, sewage treatment plant, rainwater harvesting system or pump station, we offer various service plans to provide you with peace of mind that the system will operate and function with the minimum amount of hassle.

We recommend that no matter which brand or model of septic tank or sewage treatment system you have, it is checked and maintained regularly. Preventative maintenance is protecting your investment and your environment to avoid costly septic tank repair bills or even damage to the groundwater or environment. If a tank leaks or is damaged it can cause serious problems with the drainage field not to mention big inconveniences such as not being unable to flush toilets.

Extended Warranty Bond Plan

If you have bought a Klargester or Envirocare sewage treatment plant within the last 12 months or thinking of purchasing one, you can enjoy *EXTENDED WARRANTY with our Bond Plan. This plan goes one step further offering you complete re-assurance and convenience in one simple plan. This can be purchased with your product or within 12 months of installation and is subject to completion of a FREE post installation inspection (terms apply).

*Klargester models BA-BB Biodisc 10 year warranty
Klargester models 1 & 2 Biotec 5 year warranty
Envirocare models P6 & P12 5 year warranty