Pump Your Waste with Kingspan Klargester

If your project is among the 1.5 million homes and properties in the UK that cannot connect to the main sewer, what should you do?

First, the 2010 Building Regulations recommends that a site visit is carried out by a suitably qualified expert before the preferred treatment option is decided upon. Kingspan Klargester product experts will provide that service totally free of charge.  And it’ll be well worth it.  Get it wrong and the owner of the property could be faced with the unwholesome prospect of over-flowing toilets and blocked drains.  It also leaves both them and builder at risk of prosecution under The Public Health Act 1936, and the prospect of a heavy fine.

Although many would assume that a septic tank or sewage treatment plant would automatically be required, UK building regulations stipulate that whenever possible a house must be connected to the main sewer – which is why pump stations are still the most commonly specified solutions for off-mains drainage in this country.

Pump stations are fairly complex systems and they must be properly sized – too small, and the pump won’t be able to offer the requisite storage.  Both British Standards BS EN752 and Building Regulations for Foul Drainage, with a mandatory capacity to hold waste for 24 hours to protect the property should power supplies fail. Furthermore, the pump must be specified correctly to suit the site conditions and its particular application.

Klargester Range Of Pumping Stations

Call our team of product experts at the building design stage and they will determine the right location for the pumping station and calculate what’s needed, considering factors such as:

• the height and distance to the main sewer if pumping directly to it
• the depth of the incoming drain
• the type of liquid that needs to be pumped and
• the type and number of users

It would be poor economy to base your figures on “best estimates”, especially on small sites. Even small misjudgements can result in a pumping station which is under-powered and therefore unable to do the job properly.

You can ask the team for guidance whatever the size and scale of your project – from a single home to a multi-million pound industrial development.  And you’ll have access to high quality, reliable pump stations, all designed and factory-manufactured off-site before being delivered to site, ready to install.

If you require a pump station sizing call our team on 01923 261660 or email sales@septictank-supplies.co.uk

Black MDPE 63mm x 50m Coil

MDPE 63mm

 At Septic Tank Supplies we stock Black MDPE 63mm x 50m of coil - perfect to be used in conjunction with an sewage pump station.

please call us on 01923 261660 to order

Klargester Sewage & Effluent Pump Stations 750 Litres

The Klargester 750 litre pumpstation is suitable for up to 5 people

A pump station is a chamber housing an internal electric pump/s. They are designed to move water or sewage uphill and/or over a long distance, where the gravity of the drainage runs is insufficient to provide the appropriate flow rate.

There are different types of pump stations, the main being used for;

• Domestic sewage pumping
• Commercial sewage pumping
• Effluent (waste water with no solids)
• Surface water

The Klargester pump station chambers come in many different sizes depending on the required storage capacity. All domestic pump stations used for sewage must house minimum 24 hours storage, this is in case of a fault with the pump or a power cut where there is no electricity feeding the pump(s).

Features;

• Complete package systems delivered direct to site
• Ready for immediate and simple installation
• Factory built and quality assured
• Maintenance free GRP and polyethylene chambers
• High-level alarm fitted as standard
• Full Klargester after sales maintenance available
• All Klargester products are manufactured under the quality procedures of BS ISO 9001: 2000

Design;

All standard Klargester package pump systems are supplied with;

• GRP/polyethylene chambers
• Pump(s)
• High-level alarm
• Pre-set automatic level control
•  Non-return valve
• Discharge pipe and all connections.

Options;

• Wide range of emergency overflow tanks
• 110mm or 160mm inlet connections
• Various invert depths
• Standby replacement pumps

Bespoke Systems;

Klargester manufactures pumping chambers of various diameter and depths, with pumps, guide rails and control equipment fitted as per the client’s specification. Please contact us direct and we will be pleased to quote against your specific requirements.

Please call us on 01923 261660 if you need a pump station sizing

Sewage Pumping Stations

If the main sewer is accessible but at a higher level to (or some distance from) the domestic foul drain, then a domestic sewage pump set may be used to pump unsettled sewage directly to the main.

Whilst single pump units are acceptable for individual houses, it is recommended that twin pumping systems be used for multiple dwellings.

A septic tank or treatment system pump set can be used to disperse settled effluent when a site has a high water table or adverse invert levels. Installed after the septic tank or treatment system and pumping settled effluent up to an inspection chamber, flow to the drainage system then takes place by gravity in the normal way.

Surface Water Pump sets

Due to the amount of rainwater that can fall in a short time period, Surface water run-off is often the most demanding of all applications, whether hard-standing or roof areas.

We offer a comprehensive range of packaged pump systems in both standard form or manufactured to bespoke specifications. Careful calculation of the run-off areas is essential when sizing these pump systems. 

Key Points

Firstly, don’t worry too much on sizing your pump station, all we need from you is information on key factors such as:

• Application: e.g., domestic residential /commercial
• Sewage, effluent or surface water?
• Inlet depth (below ground level)
• Pumping distance and lift
• Electrical supply

At Septic Tank Supplies we offer a range of Sewage and surface water pump stations to suit all applications from small domestic or out buildings to large commercial sites.

We supply pumping stations from the of the UK's biggest manufactures;

• Klargester
• Zoeller

Simply give us a call on 01923 261660  or send us an email - sales@septictank-supplies.co.uk with your enquiry and site information and we will be able to size the correct pump station for your application.

Septic Tank Supplies Supply A Sewage Pump Station To Pinewood Nurseries

Septic Tank Supplies are proud to have supplied a Klargester sewage pumping station to Pinewood Nurseries.

The Klargester range of sewage and effluent pump stations are ideal solutions for - Out Buildings, Extensions, Cellars, Pool Houses & External Wc's

The Klargester range of packaged pump stations are delivered direct to site ready for immediate and incredibly simple installation. They are factory built and quality assured and come with full after sales maintenance packages available direct from Klargester.

Dimensions

• Chamber Size - 560 x 1650mm
• Capacity - 400 Litres
• 63mm MDPE Outlet Fitting
• Pump Type - Ebara

The Klargester pump station comes complete with float switches, non-return valve and compression coupling.

All our pumping stations comply to BS EN 12050-1:2001 / BS EN 752-6:1998 standards

Pump Performance

The Klargester pump station can pump 3m lift with a distance of 340m or a maximum of 6m lift over a distance of 60m

Pinewood Nurseries is an independent plant nursery which specialises in growing annual bedding and hanging baskets for wholesale & retail.

 

We stand for excellent quality and simple direct customer service. We value the small size of our business as a tool to be flexible to our customer’s

requirements promptly. Our growing retail customer base helps us to develop our ideas for wholesale.

Our diversification to include a farm shop encompasses our values to support small local producers.’

Septic Tank Supplies Are The Number 1 Online Supplier Of Klargester Pump Stations

Septic Tank Supplies are currently the number one online supplier/stockist of sewage & effluent pump stations from Klargester.

Due to our long standing relationship with Klargester and the volume of pump stations we supply every month country wide, we are able to offer the very best rates and availability.

All our Klargester pump stations come with 12 months warranty and FREE delivery to any mainland site in the United Kingdom.



For more information on our range of pump stations please check out our website.

or

Call us on 01923 261660

Klargester Sewage Pump Station - 200L

By far one of our most popular pump station is the Klargester Min Pump Station

Klargester Sewage Pump Station - 200 Litres

The Klargester range of sewage and effluent pump stations are ideal solutions for - Out Buildings, Extensions, Cellars, Pool Houses & External Wc's

The klargester range of packaged pump stations are delivered direct to site ready for immediate and incredibly simple installation. They are factory built and quality assured and come with full after sales maintenance packages available direct from Klargester.

Dimensions

• Chamber Size - 610 x 700mm
• Capacity - 200 Litres
• 63mm MDPE Outlet Fitting
• Pump Type - Ebara

The Klargester pump station comes complete with float switches, non-return valve and compression coupling.

All our pumping stations comply to BS EN 12050-1:2001 / BS EN 752-6:1998 standards

Pump Performance

The Klargester pump station can pump 2m lift with a distance of 450m or a maximum of 6m lift over a distance of 60m

A "High Water A-Pak Alarm System" is recommended to ensure that there is no excess build up in the event of a pump failure.

Our price is inclusive of delivery to any UK mainland site and lead times are typically 3 working days

Klargester Mini Pump Range

Klargester Min Pump Range

he Klargester range of sewage and effluent pump stations are ideal solutions for - Out Buildings, Extensions, Cellars, Pool Houses & External Wc's

The Klargester range of packaged pump stations are delivered direct to site ready for immediate and incredibly simple installation. They are factory built and quality assured and come with full after sales maintenance packages available direct from Klargester.

The Klargester pump station comes complete with float switches, non-return valve and compression coupling.

All our pumping stations comply to BS EN 12050-1:2001 / BS EN 752-6:1998 standards